Molded Plywood and Steel Chairs

Group of Ten (10) Vintage Molded Plywood Steel Frame Chairs with Chrome Finish. Overall good condition. Wear commensurate with age (some surface wear). Approx. dimensions: 31.5 in. H x 19 in. W x 19 i

33.75 in Height X 22 in W X 23 in Depth 17.5 in Seat Height

Set of (8) Danish modern stackable white painted molded plywood chairs with steel chrome legs. 30"h x 19"w x 16"d, seat height 16" **Please Note: This item is NOT eligible for in-house shipping. Pleas

Set of (6) Danish modern stackable white painted molded plywood chairs with steel chrome legs. 30"h x 19"w x 16"d, seat height 16" **Please Note: This item is NOT eligible for in-house shipping. Pleas

Set of (8) Danish modern stackable white painted molded plywood chairs with steel chrome legs. 30"h x 19"w x 16"d, seat height 16" **Please Note: This item is NOT eligible for in-house shipping. Pleas

Set of (8) Danish modern stackable white painted molded plywood chairs with steel chrome legs. 30"h x 19"w x 16"d, seat height 16" **Please Note: This item is NOT eligible for in-house shipping. Pleas

Set of (6) Danish modern stackable white painted molded plywood chairs with steel chrome legs. 30"h x 19"w x 16"d, seat height 16" **Please Note: This item is NOT eligible for in-house shipping. Pleas

Set of (8) Danish modern stackable white painted molded plywood chairs with steel chrome legs. 30"h x 19"w x 16"d, seat height 16" **Please Note: This item is NOT eligible for in-house shipping. Pleas

Planner Group occasional table by Paul McCobb, with splayed legs and a black lacquer finish, unmarked, 20"h x 24"w x 18"d. Molded plywood chair with steel frame in a black lacquer finish, unmarked, in

A PAIR OF CHARLES AND RAY EAMES "DCM" MOLDED WALNUT PLYWOOD, CHROME PLATED STEEL, AND RUBBER CHAIRS, DESIGNED CIRCA 1945, FOR HERMAN MILLER, ZEELAND, MICHIGAN, PRODUCED CIRCA 1950, the molded walnut p

A CHARLES AND RAY EAMES "LCM" MOLDED PALISANDER PLYWOOD, CHROME PLATED STEEL, AND RUBBER CHAIR, DESIGNED 1946, FOR HERMAN MILLER, ZEELAND, MICHIGAN, PRODUCED 1981, the molded plywood back and seat joi

Set of 9 Eames Chairs for Herman Miller, c. 2001, with molded ebonized plywood seats and backs, on tubular steel bases. All with Herman Miller Label. (KLEA6202/9) {WK} Dimensions: 30 H x 19.5 W x 18 D

Arne Jacobsen (1907-1974) for Fritz Hansen Swivel Desk Chair Model 3117, Denmark, designed 1955, later production, lacquered molded plywood, steel base, casters, stamped FH mark and 'Danmark,' casters

Ross Lovegrove (Welsh, b.1958) Knoll a group of 8 Sprite chairs molded plywood and tubular steel manufacturer's sticker to underneath Height 32 x width 22 x depth 22 x seat height 17 inches Estimate $

Charles and Ray Eames 670 lounge chair and 671 ottoman Herman MillerUSA, 1956 / 1964-1978molded rosewood plywood, leather, brushed and enameled aluminum, enameled steel chair: 32.75 h × 33 w Ã

Charles & Ray Eames Early 'LCM' lounge chair, 1946-1947 Molded walnut plywood, steel. Manufactured by Evans Products for Herman Miller, USA. Underside with Evans medal label. 27" H x 24" W x 24" D Sea

molded plywood, chromed steel; each with Herman Miller paper label 29 1/2 x 20 x 20 in. (74.9 x 50.8 x 50.8 cm.), Seat height: 17 1/2 in. (44.5 cm.)

(6) vintage model 3100 "Ant" side chairs designed in 1952 by Fritz Hansen. Black painted molded plywood, tubular steel three-legged bases. Apparently unmarked. Dimensions: H 31" x W 16.25" x D 18" x S

Black molded plywood swivel office chairs (2), with steel adjustable base on four casters, the bases marked. One base is somewhat misaligned and the cap is loose. 19"w x 16"d, adjusts from 31"h to 37"

670 & 671, Herman Miller, USA, 1950. Molded rosewood plywood, vinyl, brushed and enameled aluminum, and enameled steel. Chair- 33w x 35d x 31.5h, Ottoman- 25.5w x 21.5d x 31.5h

Molded plywood swivelling desk chair on chromed steel base with casters, model 3217, by Arne Jacobsen for Fritz Hansen, Denmark, 1960s. Underside with Danish Control and maker's marks.

Hans Bellmann (1911-1990) for Horgan-Glarus GA chairs, four Switzerland molded plywood, black painted steel labeled 16"w x 19"d x 32"h

Galvanitas Oosterhout (Dutch, founded 1934), circa 1970s. A set of eight mid-century modern S16 molded and cherry stained plywood and black patinated pressed steel stacking school chairs, each industr

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller, DCM chairs, set of five, USA, 1998, molded ash plywood, chromed steel, rubber, nylon, rectangular black tag, dated paper labels, 19