Japanese Korean, Chinese Diving Helmet Brass Faceplate

Vintage brass faceplate for a Japanese, Korean, or Chinese diving helmet. Outside diameter is 6.5 inches across. There is no gasket or glass present. The inner brass ring to secure the glass is presen

Grouping of seven brass diving helmet wing nuts. We are not sure of the specific model of helmet these would be used on, but possibly on Japanese, Chinese or Korean helmets. All are in good condition,

This is an authentic example of the classically designed diving helmet prevalently made in Japan and Korea during the 20th Century. We are unsure of the manufacturer as no names or ID plate was applie

Classic example of the traditional Korean or Japanese diving helmet. This is a 3 light (3 windows) 12 bolt (12 breastplate studs) model helmet. Made with a copper body and brass hardware, this style o

Presented here is a very nice and attractive diving helmet bonnet. The manufacturer or country of origin is unknown but it fits the style of helmets made in Japan or Korea. The only possible identifyi

Presented here is a very nice and attractive diving helmet bonnet. The manufacturer or country of origin is unknown, but it fits the style of helmets made in Japan or Korea. The helmet features a wond

This is a nice original set of diving helmet brails or straps for a Yokohama Japanese diving helmet. The straps are brass and well used. Each has a corresponding number stamped on the end to ensure pr

Nice vintage tee wrench consistent with a style used with Japanese diving helmets. Has CDC stamped on it. Measures 3 and 7/8 inches long and the handles is 3 and 15/16 inches wide. Please refer to pho

The Yokohama Diving Co., Ltd 12 Bolt Japanese Copper and Brass Diving Helmet Presented on a Associated Wooden Base. Company emblem attached to the surface. Helmet measures 17" x 14-1/2" x 16-1/2". Est

Wonderful original example of a KIM Korean diving helmet. This is a 3 light (3 windows) 12 bolt (12 breastplate studs) model helmet. Made with a copper body and brass hardware, this style of helmet ha

This is a genuinely nice example of the classically designed diving helmet prevalently made in Japan and South Korea during the 20th Century. We are unsure of the manufacturer; the original brass ID p

This is an authentic example of a classic style of vintage diving helmet primarily made made in Japan and Korea during the 20th Century. We are unsure of the manufacturer or country of origin. The ori

An original unrestored vintage diving helmet in 3 light 12 bolt pattern. KIM in Korea made this helmet. The original brass ID plate is still present on the breastplate but very difficult to read. The

This grouping of original parts includes a Schrader Mark V faceplate complete with glass and guard, an unmarked non-return valve, a double female brass fitting, a pair of brass and copper covers wrist

Gorman Diving Helmet Face PlateThis is a Siebe Gorman face plate that does not have a serial number. The diameter of the outside brass section is a little over 5.75 inches or 146 mm. The glass does no

This is an unused new US Navy Mark 12 diving helmet brass base part. The component is in excellent condition and is unstamped. If you have a Mark 12 helmet that has been bent or decommissioned, this i

This is a Morse commercial glass face plate with leather gasket in excellent condition. No damage to the threads, no chips or cracks in the glass, with retaining ring, both front turning knobs and pro

This is a vintage US Navy Mark V diving helmet tee wrench. This tool is used to secure and remove the wing nuts on the Mark V helmet. Good original used condition, made of brass. All items will be shi

Before Morse could certify a Mark 12 diving helmet ready, it had to be pressure tested. A plate like this would secure to the Mark 12 helmet and then air pressure applied. Brass part weighs approximat

This is a vintage diving helmet exhaust body. This part was likely off a Morse or Schrader helmet during the first half of the 20th century. It does appear to have been removed from a helmet long ago.

This helmet appears to be an unused example of the now classic Chinese diving helmet design. This is a model TF-3 and was made in China in 1996 according to the ID plate. The helmet also still retains

This helmet is an unused new old stock example of the Chinese TF-12 diving helmet design. This helmet was made in August of 2003 according to the ID plate. The helmet still retains a Chinese decal app

Japanese bronze diving helmet. 12"h x 16"w x 17 1/2"d

Fine cast brass antique Japanese vase with high relief embossed graped and leaves. 5w x 4.5d x 8.75h. Chinese brass and enamel double handled dragon vase on footed base. 6.5dia x 9.75h