Ernst Plank Live Steam Pumper

Ernst Plank. German - 1890 - 16" L x 12 1/4" T.

Includes European-style engine in green with burner on bottom, "EP" plate on backside of engine and with matching green four-wheel tender. There is one green passenger car labeled "I" and "II" with op

Enamel painted tin, 11.5” long. It has a live steam mechanism with original burner and funnel, missing wick. It retains its stack ring and filler cab and would benefit from a cleaning, showing moder

Germany, early hand painted cab in green with brass finish boiler, tall stack, Vulkan label on side, together with hand painted four wheel tender.

Ernst Plank painted tin Ferris wheel steam toy accessory, complete with six gondolas, each with two painted composition dressed sailors, two flags, a stepped platform base, and a hand crank on flywhee

1293. BOXED AMERICAN MARKET ERNST PLANK TURBINE LOCOMOTI | Live steam, gauge O, very unique loco powered by steam turbine as opposed to traditional piston and cylinder, turbine is mounted in cab, exha

Ernst Plank painted tin and brass live steam Vulkan five-piece train set, gauge width - 3 1/2'', to include a locomotive, a four-wheel tender, and three passenger cars, each with a hinged roof, engine

By Ernst Plank German - 1880's - 8.75" L Very Fine Condition The brass boiler, complete with its original burner assembly. The E. P. Logo stamped on the boiler front.

Rare circa 1910, German E, Plank live steam toy train locomotive. Measures about 8 1/2" long, mostly complete, needs some repair to cab, and top of one running light. Missing burner. A rare piece that

Ernst Plank steam engine with separate four-wheel transmission, both retaining original maker's plate and are mounted on wood bases, engine outfitted with a governor, 10'' h., 7'' w.

ERNST PLANK steam engine with ferris wheel, around 1900, drive model, mounted on a wooden board, board 39 x 14 cm, used, scratches on the paintwork, without burner German Description ERNST PLANK Dampf

steam powered flywheel with governor on wood base in original box with colorful paper label; housing retains makers' brass plaque engine on base 5.25" w. x 8.5" t. x 5" d.

Made by Buckman Mfg. Co. New York City - 1872 - 15" L x 9.125" T Excellent Plus Condition Buckman was one of the earliest steam toy makers in the United States. Made of hand painted tin, brass and a t

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

1039. UNION MFG. LIVE STEAM FIRE PUMPER | Nice detail to steam piping, copper finish vertical boiler with rear platform and cast spoke wheels. Provenance: Norm Schaut Collection. | 11" l. | (Very Good

Ernst Plank Cosmos steam engine, in its original box, 13'' h., 4 1/2'' w.

1041. ERNST PLANK HERCULES STEAM PLANT | Desirable engine, small scale. | 12" h. | (Excellent to Pristine Condition) | $600 - $900

1038. LIVE STEAM FIRE PUMPER | Simple design cart with mounted boiler at rear. Provenance: Norm Schaut Collection. | 8" l. | Overall in (Very Good Condition) | $700 - $1,000

1 Gauge. Circa 1890s. 35cm over-all l. Nice 2-2-0 loco with stop/start & reverse. It is missing its spring, but all else appears to be there. It has its matching tender and shows light to moderate pla

302. UNION LIVE STEAM FIRE PUMPER | 9"l. | (VG Cond.) | $400 - $700

Circa 1910 Ernst Plank Vertical Steam Engine. All original with EP nameplate. Comes with Wilesco Machine Shop Accessory that has hammer, grinder, and saw. Steam Engine measures 11" Tall. Very Good-Exc

All original. Wheel has breaks. 14" Very Good

Very hard to find early 20th century Ernst Plank electric steam engine. All tin construction with 7" by 7" base. 11" tall to top of chimney. Has general wear, and some dings to boiler. Includes origin

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla