Enco Lathe

This has an approx. 8" Swing

ENCO Model 109-1005 combination mill and lathe with tool box and accessories.

Cherry Roll Top Watch Makers Lathe Bench. Cherry roll top bench with 4 drawers, a single door and open compartment below, used condition and overcoated finish; measures 50 in. high x 28.25 in. wide x

A Watchmakers Brass and Steel Mandrel Lathe and Gear Cutting Machine, 19th Century, Each unsigned. Mandrel Lathe: H: 6 1/2 x W: 18 x D: 7 in. Gear Cutter: H: 9 1/2 x W: 12 1/2 x D: 7 1/2 in. From the

7ft DSP sign with bright colors, high gloss, porcelain chips and minor scuffs. PLEASE NOTE, THERE IS ONLY ONE WAY TO PAY FOR ONLINE ITEMS IN THIS AUCTION WHICH IS THROUGH LIVE AUCTIONEERS. THIS IS THE

No shipping ! Comes apart in approx 6 pieces. Bring help to take apart and remove. NO SHIPPING

W.F. Barnes & John Barnes Co. No.4 Metal Lathe, approx. 34"x39"x44"H ---BUYER TO ARRANGE SHIPPING

American. 1920. Cast mounts with plated steel parts. Stamped, "Dalton New York U.S.A". 16 x 36 x 12". Mechanically functioning. CODE:TOOL

Louis Levin & Son, Santa Fe Springs, Ca., a watchmakers 8mm lathe with accessories, including a cross slide, milling attachment, tip over T rest, filing rest, collet holding tailstock, motor, backshaf

DSP. Sign is maker marked SP & Dated 1960. A very nice example of this large porcelain sign from Enco Gasoline showing excellent red, white and blue coloring throughout each side. CONDITION: Side one

A turn of the century Boley & Leinen 6mm watchmaker's lathe. Steel body with Brass fittings, numerous attachments include a 6-jaw chuck, fixed and feeding tailstocks, center rest, sliding table, small

Orignal vitnage 7ft double sided porcelain ENCO service station sign with original ring. Sign has porcelain loss, scratches, rust , and wear from use and age. Displays well with original ring. it meas

60" x 84", DSP porcelain sign has very good color and gloss. Side #1 has small chips and scratches present. The reverse has heavier chipping and wear. Marked SPS 2-67. PLEASE NOTE, THERE IS ONLY ONE W

G. Boley, Germany, a nice plain bearing Geneva pattern lathe with box and accessories, including plain and lever feed collet holding tailstocks, 50 collets including wheel and ring chucks, offset driv

F.W. Derbyshire, Waltham, Mass., a good "Model 750" lathe with accessories, cast iron bed with 10 mm ball bearing headstock and lever feed 10mm collet holding tailstock, compound slide rest, tip over

A large lathe with associated tools.

A 19TH CENTURY CAST BRASS AND STEEL WATCHMAKER'S LAITHE together with parts 51cm overall

Schaublin machining tools, watchmaker's tools for lathe, slide on pieces. Good condition.

An 8mm watchmakers lathe with 74 collets, the lathe unmarked, with tip over tool rest and tailstock, mounted to a Borel mount with motor, together with a Boley box containing 74 collets by Boley, Wolf

Belt-Driven Metalworking Lathe, c. 1930 Precision machine tool, suitable for smaller workshops, including bed, carriage with cross-slide, headstock and tailstock, 25 2/5 in. wide. With numerous access

This Unimatt lathe is the model SL DB200 with one auto feed lathe bed, two manual feed lathe beds, and one lathe bed for duplication. There are two individual motor sets (cast metal not plastic); spar

Lathe is approx 59" total length. Cabinet is approx 18" x 72" x 33". No shipping ! Buyer to bring proper help / equipment to load !

Jeweler's - Watchmaker’s Lathe On Walnut Stand. Unsigned, lathe with various attachments, mounted on a custom walnut base, in nice condition. 9.25 in. high x 17.5 in. wide x 11 in. deep. Weight: 18.

Bowl. A tall oval shape signed ( Philip Moulthrop American 1947 - ) and numbered PCM Philip Moulthrop "Wild Cherry" Prunos Serotina 720070 on base. From an East 72nd St NYC estate. - Dimensions: 11.5"