Brass Locomotive Bell - 10 1/4" diameter

Brass Locomotive Bell - 10 1/4" diameter Brass Locomotive Bell - 10 1/4" diameter. The base has two mounting holes and a slight curvature to the base which would have allowed it to sit flush against a

10" Diameter Brass Steam Locomotive Bell Bell measures 10" in diameter with an acorn top nut. The yolk has been repainted and appears to have MD 227 cast in near the bottom. The bottom plate is curved

14 1/2" Diameter Brass steam locomotive bell. The bell is polished brass with a repainted red interior. Equipped with a Trans Devices ringer. The bell itself is otherwise unmarked. The yolk has 12 V S

Diameter measures 14-1/2" x 20" Tall

Railroad bell is air powered. Bell is approx 12" in diameter and 10 3/4" tall. It is mounted on a rolling stand. No shipping.

Measures 10 ¼ inches in diameter. Overall with mount 20 x 12 ½ inches tall. Has key, paper work & original fitted box. Mounted mantel clock in mahogany with silver dial and polish brass.

14" tall x 10" diameter. Acorn Finial, pull cord to ring. Served on a 1921 Reo Pumper unit

From a home in Lake Placid, NY

Columbia Reproducer, crank, brass bell horn. Horn measures 14" diameter x 21" long.

Railroad Brass Engine Bell with base mount, 14.5" diameter. Local Pickup Only or Buyer Arranges Shipping.

Michigan Central Railroad Front Mounted Steam Locomotive Bell #2426? Bell measures 14 1/4" in diameter and is cast with MCRR and what appears to be 2426 on the top of the bell. The bell was later stam

Brass Air Powered Diesel Locomotive Bell - 12 3/4" diameter Bell is equipped with a Graham White double acting ringer. Bell shows minor dents and wear at the edge, but no major damage. The mount appea

3-piece brass lot including: pair of beehive brass candlesticks with push-ups. - 9" Height. Figural brass call bell - 4" height. Brass embossed charger - 10" diameter.

Solid piece, no markings, red painted bell interior, 25 inches tall, 16 inch bell diameter, no shipping due to weight Line Item # 67

A heavy little bel with 12" diameter. It also stands 9" on the bell height. With the yoke it measures 25" tall. It mounts flat (not a curved boiler). It is probably from a gas car or electric locomoti

Diameter measures 13" x 23" tall

12" diameter x 18.5" tall with cast yoke and acorn finial

12" bell diameter. The case yoke is 20" tall with acorn finial.

Stamped PRR (Pennsylvania Railroad), 15.75" diameter of bell x 20.5" tall. Iron frame.

From a New York Central "Pacific" 4-6-0 #805 Steam Locomotive. 16.5" diameter x 23" tall. Called a Ten Wheeler, built 1905-1908

12" diameter x 18.5" tall in triangular yoke

Called the Yard Goat. Diameter measures 13" tall x 21" tall

HANGER & BELL TOTAL HEIGHT IS 20" TALL--BELL IS 10" DIAMETER

Mounted on board and bracket. 8" diameter x 9.5" tall on the bell. Cast brass example in excellnet condition