10 1/2" BRASS STEAM WHISTLE

Nice original brass steam whistle. 10 1/2" Excellent

A single chime brass whistle by Crane Company measuring 10 1/2". Crane 125 is cast into the valve body. Some minor nicks along the top edge and a few spots of rust but no major condition issues to not

A brass steam whistle by Buckeye Brass Works in Dayton, Ohio. It has a 2 1/2" diameter, 5 1/2" cylinder and it stands 14 1/2" tall overall. It has a fine acorn finial. There are a few dings. The Bucke

Brass steam whistle. 9 ½" x 2 ¾".

Brass steam whistle. 7 ½" x 1 ½".

Acorn finial. 37" tall x 10" diameter. Nice Patina, impressive example

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a

3786 Embossed on handle, One Dent, 10 3/4"x3 1/2" Whistle, Total Dimensions 11"x5 1/2" with Handle, 3/4" ID

9 7/8"x2 1/2" Whistle, Total Dimensions 10"x4" with Handle 3/4" ID

11 1/4"x 2 7/8" Whistle, Total Dimensions 12 1/4"x3 1/2", 1" OD

12 3/8"x2 7/8" Whistle, Total Dimensions 17 3/4"x5 1/2" with Handle, 3/4" ID

12.5" tall x 3.25 diameter

Brass. 12.5"x2.5"

Unmarked. 12" x 3" with brass acorn finial

A Brass Steam Whistle 19th Century with a bronze base and lever. Length 12 inches. Property from the Estate of Peter F. Stone, Buchanan, Michigan

All Brass, acorn finial. 12" tall x 2.75

Acorn finial. 10"x2.75"

Unmarked Maker. 12" x 2"

One dome top. The tallest is 10" x 2"

Brass steam railroad train whistle, 12"l, 2 1/2"d

Crosby Steam Gage & Valve Co. brass 3-tone steam whistle stamped 6207, polished, 5"x20.5" with 10"L tube

Brass 1-tone steam whistle with cast iron base and no valve, polished, 6"x19" with 10.25"L tube

Buckeye Brass 3" Diameter / 12" Tall Three Chime Steam Whistle Three chime Buckeye Brass Works three chime steam whistle. The whistle is stamped Buckeye Brass Works Dayton O at the top edge. Whistle m

12" Single Chime Steam Whistle Bell measures 10 1/2" tall and has an 1 1/4" inlet. The bell has two moderate grinding marks which have opened up pinhole leaks in one side of the bell. No manufacturing