Set of six 1970's tubular steel spaghetti chairs

HARVEY PROBBERSet of six cantilevered dining chairs, 1970sChrome-plated tubular steel, cane. Manufactured by Harvey Probber, USA.Each: 27" H x 21.5" W x 19" DSeat height: 16.5"

Set of six vintage plastic cord and tubular steel side chairs in the manner of the iconic 1960s 'Spaghetti' by Giandomenico Belotti for Alias, Italy. Dimensions: H 31.5" x W 16.75" x D 18" x SH 17.5"

Harvey Probber Set of six cantilevered dining chairs, 1970s Wicker, chrome-plated tubular steel. Manufactured by Harvey Probber, USA. Each: 27" H x 22.25" W x 22" D

Height: 75 cm Width: 45. cm Depth: 46 cm Seat Height: 44 cm Set of six chairs designed by Antonio Ari Colombo for Arflex in the 1970s. The structure of the chairs is made of tubular steel. The line of

Set of six Breuton Industries stainless steel chairs upholstered in grey leather circa 1970. Ht: 28.5" Width: 22" Depth: 24" Seat Ht: 17"

Set of six CESCA side chairs, USA, 1970s Chromed steel, enamaled wood woven wicker Some chairs with Stendig labels 32" x 18 1/2" x 22"

Dining set: extension table and six chairs, Highpoint, NC, 1970s; Chromed steel, upholstery, laminate; One chair with upholstery label; Chair: 34" x 20" x 27", table: 28 1/2" x 48", one 12" leaf.

Ludwig Mies van der Rohe (1886-1969) for Knoll Brno chairs, set of six USA, circa 1970 chromed steel, wool mohair upholstery unmarked 22 1/2"w x 24"d x 31 1/2"h

Modern Dining chairs, set of six c. 1970chrome-plated steel, plastic wire, leather each: 32 h x 16.5 w x 16 d in (81 x 42 x 41 cm) This work will ship from Lambertville, New Jerse

In the manner of Ludwig Mies van der Rohe chairs, set of six c. 1970 chrome-plated steel, leather 18.5 w x 31 d x 32 h inches

Set of six dining chairs, USA, 1970's; Chromed steel, Upholstery; Unmarked; 35" x 19 1/2" x 23"

Set of Six Warren Platner Upholstered Chromed Steel Dining Chairs 1970s Height 29 inches, width 26 1/2 inches, depth 21 inches. C Estate of Arthur Maslow

Set of six lacquered wood, leather and stainless steel dining chairs, Italy 1970s. 27" H x 20" W x 19" D.

ARNE JACOBSEN (Denmark, 1902 - 1971) for FRITZ HANSEN. Set of six chairs model 3207 'Series 7', design 1955. Chromed tubular steel frame. Recently professionally reupholstered in cognac coloured anili

ARNE JACOBSEN (Denmark, 1902 - 1971) for FRITZ HANSEN. Set of six chairs model 3107 'Series 7', design 1955. Chromed tubular steel frame. Recently professionally reupholstered in cognac coloured anili

Ludwig Mies van der Rohe (1886-1969) for Knoll Brno chairs, set of six New York, New York, circa 1970 leather, stainless steel Knoll paper labels 23"w x 22"d x 31 1/2"h

Chromed tubular steel frame with cantilevered support, probably also beech wood, and seat and backrest in mesh. A Bauhaus-Thonet advertising panel is enclosed. The B32 chair was designed by Marcel Bre

Italy, H. 78.5 x 46 x 55 cm. Made in Italy. Chrome-plated tubular steel, brown leather.

SET (4) TUBULAR CHROMED STEEL/UPHOLSTERED CHAIRS, C.1970'S

Dining set: extension dining table, and six chairs, two arm-, four side-, USA, 1970s; Walnut, matte chromed steel, upholstery; Side chairs: 41" x 22" x 72", dining table: 29" x 68" x 38", two leaves:

MARCEL BREUERSet of eight 'Cesca' chairs, model no. B64, 1970sChrome-plated tubular steel, painted wood, cane. Manufactured by Knoll International, USA / Gavina, Italy and distributed by Stend

Set of six dining chairs: two high-back, four low-, 1970s Chromed steel, upholstery Unmarked High-back: 37 1/2" x 21" x 26", low: 29" x 21" x 26"

A set of six mahogany, steel and leather arm chairs circa 1970. Ht: 29.5" Wd: 20.5" Dpth: 19" Seat: 18"

Set of four, attributed to Gastone Rinaldi for Rima Margot chairs, Italian, 1965-1970. Chrome plated steel, tubular tulip bases. Later created upholsterer-made white vinyl back and seat cushions. Appa