Custom Made, bar-form casket, mahogany, pine, brass,

Originally custom made for kitchen island, each has gray pewter pale aqua striped and herringbone fabric, mahogany frame on casters. Brass nail head trim and tufted channel backs. Each measures 32 wid

Custom made in 2005, each with faceted mahogany stiles set with brass finials and hand grips, herringbone upholstery with brass tacking, strap form arm rests, microsuede back panels, 41 x 29 x 25 in.

Custom made in 2005, each with faceted mahogany stiles set with brass finials and hand grips, herringbone upholstery with brass tacking, strap form arm rests, microsuede back panels, 41 x 29 x 25 in.

A custom made pine and brass maritime coffee table. This table was made for a yacht and appears to be sealed with marine varnish. Ht: 16" Wd: 60" Dpth: 40"

Description - Custom made mahogany chest on chest with brass figures and writing tablet Dimensions - 51.5" x 38" x 19.5"

Heavily Carved Custom Made French Provencal Column Form White Washed Pine Standing Lamp with Custom Shade. 65 inches x 12 inches in diameter, 19 inches in diameter with shade.

Custom made mahogany corner stained glass canopy pub bar with raised panels and mirrored back. 20th century. Overall 91 3/4"h. Corner sides measure 86 1/2"l and 82"l.

George III Brass-Mounted Mahogany Jewelry Casket , octagonal form, restored silk interior, lift out tray, h. 4 in., w. 13 in., d. 8 in

Luigi Caccia Dominioni Custom bar cart for Casa Coggi, Arenzano AzucenaItaly, c. 1960mahogany, brass 24 h × 22.5 w × 22.5 d in (61 × 57 × 57 cm) Provenanc

Custom Made silver plated tray table from William Blair. Mahogany with Maple drawer. Made for your drink mixing and serving needs!

Circa 1900. Having a plank pine top above molded base with wainscot type case and molded foot. The backside is open for storage if so desired. H33 1/8" W48" D 23" Sold from the collection of a promine

PLEASURE CRAFT Custom Made Domed Trunk Chest. Textured brown vinyl form with brass studs and oak straps. Marked. Brass plaque inscribed and dated 1976-- Dimensions: H: 22 inches: W: 27 inches: D: 17.5

the stand custom made later. 22 3/8" high, 17 1/4" wide, 13 1/4" deep. Light use wear, wear to lacquer over brass.

c. 1960; brass, steel, mahogany and leather; unsigned 30 x 50 x 26 in. (76.2 x 127 x 66 cm.) Provenance: the desk was custom made by John Vesey and published in Designers West September 1986, Volume 3

Necklace. This hammered brass/gold toned sculptured collar necklace is DESIGNER SIGNED AND NUMBERED ( etched by hand). Each piece custom made. Impressive statement bar necklace, wide bar of 1 3/8 in.

Antique Federal Tilt-Top Breakfast Table - Highly Unusual Form - Made of Mahogany circa 1810 - Featuring a Turned Column, Fluted legs and Brass Capped Feet - The Table measures about 47 inches in diam

On brass ball feet. Mahogany caddy. Interior refinished without compartments. Dimensions: H 5.75" x W 9.75" x D 5.25" Condition: Small edge damages, tight crack to back of top.

Custom Made at Jonas, with curule form base. 16"h x 31"w x 22"d

Philip (1908-1988) and Kelvin (b. 1936) Laverne scroll form coffee table in patinated brass and pewter over wood with an acid-etched and enameled "Wedding Dance" scene. Table was custom made for the o

5th-2nd century BC. A bronze casket foot in the form of a siren with female head and breasts, wings outspread, single large clawed foot to the base; tang to the back; mounted on a custom-made stand. 4

3 Leather, Brass and Wood Bar Stools with Backs. Made by Hancock and Moore. Leather bar stools with mahogany legs and brass foot rail. Rolled back to the chairs with leather matching leather welting.

Mahogany, bonnet top, string inlay and brass hardware. 60 x 14 1/2 x 8 3/4

Custom made slant front 4 drawer desk with pattery motif and brass pulls and key. Red Mahogany by Jasper Cabinet Company.

An unusual form in its original finish, with two dovetailed drawers, mahogany case with a pine backboard and early brass pulls. 17”H x 6”W.