BRASS & IRON STEAM POWERED WHISTLE

Marklin Germany toy steam engine, tin, brass, nickel and iron, has a steam gauge, steam whistle, and spigot all with red bakelite handles, 15"H to top of smoke stack, base is 11.5" square. Also, Fleis

Cast iron, brass and copper. unsigned. Donkey attached to a work job. 12 x 8 x 3 inches. Note: Arnold Edmund Thompson (1931-2010) Marblehead, MA. In the early 1950's during his USAF tour he perfected

Brass 1-tone steam whistle with cast iron base and no valve, polished, 6"x19" with 10.25"L tube

Wilesco toy steam engine, tin, iron, brass, and nickel, has steam whistle, has burner, appears to be pretty complete, 12"H, platform is 8" x 5.5"

A large brass steam whistle mounted on a cast iron base. The housing measures 5" in diameter. It has a nice acorn finial. The cylinder measures 7" tall. The base hex nut measures 2 1/2" across so it's

Early brass finish boiler and frame, piston rods on sides, open engineer's compartment, fitted with whistle and valves on boiler, steam powered. 7 1/2" l.

Brass Steam Whistle, made by Vilogo Co., AW152, Comes with custom-made stand, 61 inches with stand

Stamped L1, 33M?, 660C37. The whistle is 18.5 tall x 6.5" diameter

Acorn finial. 37" tall x 10" diameter. Nice Patina, impressive example

A large brass steam whistle with a 6" diameter. 3 chambers 2 1/2" feed pipe, 22" total height with a 14" chamber height, dome top. Threads seem to work, lock nut on top, numerous dings, some sticky la

Apprx 6 1/2" in diameter. 20 1/2" from top cap/nipple to fitting at base. Fitting is 2" inside diameter

AB 199. Philadelphia. Acorn finial. 36" tall x 8-3/4" diameter. On a custom made stand. An impressive example

Jan. 30, 18-7, Crosby Steam Gauge and Valve Co., Boston. 19" tall x 5.5" diameter.

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a

22"x6 3/4" Whistle, Total Dimensions 60"x7", 2 1/4" OD

This is a Lunkenheimer three inch, three chime steam whistle. Dome top, with a patent date of June 7, 1892 on the base. Nice original piece, complete with lever.

24"x8 1/2" Whistle, Total Dimensions 48"x8 1/2", 2 1/4" OD

3786 Embossed on handle, One Dent, 10 3/4"x3 1/2" Whistle, Total Dimensions 11"x5 1/2" with Handle, 3/4" ID

Shows patina but is solid. 4 1/2 IN; dia 15 1/2 IN; long, overall with pipe attachments is 18 IN;.

Canadian. 1920s. Brass. Original and correct acorn finial. Stamped, "Jas Morrison Brass Co. Ltd., Toronto" upper bell. Horseless Carriage Museum, Fenelon Falls, Ont. 19"H x 4" bell diameter.

Three (3). American. 1920s-40s. Includes: 6" (l) 2.5" (d) Lunkenheimer "wildcat", Buckeye Brass Works 8" (l) 3.25" (d) 3-chamber fluted and Penberthy 5.25" (l) 3" (d) whistle. Center whistle stamped,

19.5" tall x 5.5" diameter. Excellent

Dayton Ohio, Stamped 24, 13 3/4"x3 3/8" Whistle, Total Dimensions 14"x5 1/2" with Handle, 1 1/8" ID